Appendix E Consultations

- If the development includes grade level retail or residential units, please take note that door-to-door delivery will not be provided to these units. Canada Post is happy to install a Community Mailbox to pfovide service to these units. Please coordinate a location with the Canada Post Delivery Planner for the area. If there is no room on the property for the Community Mailbox, service can be provided via another Community Mailbox in the area. Options to service the units from the tower (lobby) lock-boxes or via a front-Ioading lock box erected on the outside of the building can also be discussed with the Delivery Planner.

101	109	207
109	110	208
103	201	209
104	202	210
105	203	301
106	204	302
107	205	303
108	206	304

Lock-Box Assembly Requirements

The complete Canada Post standards Manual for adders 6 Developers con be downloaded at HTTP,s//mew contact post cerepormciassets/pdebusMessfstandardsmanual_endf 

Compartment Size

• Horizontal lock-box models used In mailroom a must have the following minimums'
  • Residential compartments must be at least 12 5 x 13 5 cm
  • commercial compartments at least 13.5 x 30.5 an
  • Parcel compartments at least 30 5 x 30.5
• Vertical lock-box models must have mm comp size of 25 x 12.5 a (Most models are 40 x 12 7 cm)

Heights

• All lock-box assemblies must be molted in a manner that MI riot requires the delivery employee to reach higher than 170cm or lower than 45cm when delrxenng to the equipment With respect to horizontal lock. boxes me Ernes above wit leery mean that maximum mum bet of compartments that can be included in each column of residential compartments would be eight

Rear-facing Lock-boxes 

• Protects with more than 100 units are required to be serviced via a rear-loading lock-box assembly
• There must be a man or at least 100Cm Of working space ken( me back of the boxes to the wall.
• A ledge under the bottom row of bores s also recommended in rear-loading designs This ledge is to be directly under' the bottom row of boxes (no space between ledge and bottom of boxes and must sack out at least 20cm from the back of the boxes
• Mailroom 000r is required to provide a minimum SIM opening
• Lighting should be at least 100 lux (measured 75 cm from the floor) 

Access

• All Buildings where the lack-boxes are required to be serviced from inside the Molding are required to install a Canada Post Crown lock C the building intercom. The intercom is pre-fabricated with an internal housing for the loci The lock can be obtained from the local delivery supervisor
• If the budding has more than 100 units. a rear-loading lock-box anent/Cy wit be metaled. The door to the Canada Post dithery area must be fitted with a sp«thc model of deadbc4 TT** because Canada Post will wooly a key grander made specifically for the Canada Post key that will fit inside the deadbolt purchased by the developer. 

Numbering

• Compartments should be numbered vertical and left to right on the delivery side of the boxes 207