282

APPENDIX F – Zoning By-law 8600 Excerpts

24.30.20 LOCATION OF BICYCLE PARKING SPACE.

.1 All bicycle parking spaces shall be located on the same lot as the use they are intmded to serve.

TABLE 25.5.20.1- PARKING AREA SEPARATION
PARKING AREA FROM		MINIMUM SEPARATION
.1	Huron Church Road between the south limit of College Avenue and the north limit of the EC Row Expressway	10.00 m
.1	Save and except for Parts 4 and 5. Plan 12R-12366 and Part Lots 1346 to 1360. Pan Lot 1920 and Part Block A, Registered Plan 1059 (situated on the west side of Huron Chinch Road, north of Tecumseh Road West)	3.00 m
.2	Any other Street	3.00 m
.3	An Interior lot line or alley.	0.90 m
.4	A rear lot line on a lot located in a Commercial District 3.9	10.00 m
.5	A building wall in which is located the main pedestrian facing the parking area	2.00 m
.6	A building will containing a habitable room window or containing both a main pedestrian entrance and a habitable room window facing the parking area where the building is located on the same lot as the parking area	4.50 m

.1 Ingress to a parting area from a street or alley or egress from a parking area to a street or alley shall be by way of an access area.
.2 An access area may cross a required yard or a required landscaped open space yard
.3 An access area exclusively saving a loading space or serving a building in a Manufacturing District 1 or Manufacturing District 2 shall have one or more one-way lanes. Each lane shall have a minimum width of 3.50 meters and a maximum width of 6.50 meters.
.4 An access area for all other uses shall have one or more one-way lanes. Each lane shall have a minimum width of 3.50 meters and a maximum width of 4.50 meters.
.5 The width of each lane in an access area shall be measured a maximum of 3.00 meters from the lot line the access area crosses.
.6 The width of the access area where it crosses the lot line shall be a minimum of the measurement in Section 25.5.30.5.