Product Parameters:

fRe 1-Hour Rated exterior wall and interior partition panels are factory assembled from a unique combination of tried and true cladding components resulting in a building composite that delivers superior performance in all categories compared with mineral wool core sandwich panels.

Panel Length: 8’ to 40’ maximum Standard Weight: 5.5 psf

Features and Benefts:

Panel Length: 8’ to 40’ maximum Standard Weight: 5.5 psf

Features and Benefts:

• Product Parameters:

  Panel Width: 40”

  Panel Length: 8’ to 40’ maximum Standard Weight: 5.5 psf

  Insulation Material: CFC-free foamed-in-place polyisocyanurate foam 2.1 to 2.5 pcf density

  Features and Benefts:

  • Double the R-Value per inch of other hourly rated sandwich panels

• • Factory assembled composite, delivered on-site in one piece for easy one-step installation

  fRe 1-Hour rated Walls are designed to match all standard AWIP facing panels and finishes so you won’t have to settle for comprised aesthetics. With an R value of 32, fRe panels will meet today’s restrictive energy requirements without having to weigh over 8 pounds per square foot and be 9” thick.

  Tested & Approved:

  All Weather Insulated Panels’ products have been extensively tested under a variety of North American standards:

  CAN/ULC S101: Fire Endurance

  ASTM E119: 1 Hour Wall

  ASTM C518/C1363: Thermal Transmission

  ASTM E283: Air Infltration

  ASTM E331: Water Penetration

  ASTM E72: Structural Strength

  ASTM E84: Flame Spread

  AAMA 501.1: Air/Water Infltration

  Joint Confguration: Double offset tongue and groove with concealed fastener

• • Structurally superior to mineral wool sandwich panel

  Profle Availability: All standard wall profiles (DM40-F, FL40-F, ST40-F, HE40-F, HE40A-F)

• • Extremely resistant to deflection, breakage and moisture penetration

  Metal Facings: 26ga galvanized steel (22ga, 24ga available)

  Coatings: PVDF & SMP (other coatings available)

• • Available in all standard colors and profiles as AWIP standard 40” wide wall products

  Accessories: Fasteners, concealed fastener clips, sealants, brake formed flashings

• • Hidden fastening at joints

  **R-Value tested in accordance with ASTM C518/C1363 at 40˚F mean temperature, adjusted for a windspeed of 15mph.

• • Designed for interior partitions or exterior wall applications

• fRe 1-Hour Rated exterior wall and interior partition panels are factory assembled from a unique combination of tried and true cladding components resulting in a building composite that delivers superior performance in all categories compared with mineral wool core sandwich panels.

  Panel Thickness:	4.5”
  Insulating Values (R):**	32

BUILDING FOR TOMORROW

Page 948 of 1110