25.5.50 PARKING AISLE

.1 A parking aisle is prohibited within a street and shall be designed to prevent any motor vehicle that utilizes the parking aisle from entering upon a street except by way of an access area.

.2 A parking aisle located, in whole or in part, within an alley shall have a minimum width in conformity with Table 25.5.50.3. Where a parking aisle is not located, in whole or in part, within an alley, the parking aisle shall be designed to prevent any motor vehicle that utilizes the parking aisle from entering upon the alley except by way of an access area.

.3 The minimum width of a parking aisle shall be as follows:

TABLE 25.5.50.3 – MINIMUM PARKING AISLE WIDTH
ANGLE OF PARKING SPACE RELATIVE TO THE PARKING AISLE (IN DEGREES)		MINIMUM WIDTH OF A PARKING AISLE
.1	30.0o	3.50 metres
.2	45.0o	4.50 metres
.3	60.0o	5.50 metres
.4	90.0o	6.00 metres
.5	All angles and widths not indicated above are deemed to be the next highest angle and width indicated.

.4 A parking aisle having a width of less than 5.50 metres shall be designed to provide one-way movement of vehicles by providing a vehicular ingress at one end and a vehicular egress at the opposite end.

.5 Where a parking aisle has a length of 50.00 metres or more and intersects with another parking aisle, there shall be a minimum 2.50 metre wide landscaped open space island at the intersection of the parking aisles.